Klystron Power Supply:
Scientific Microwave manufactures two type of power supplies for the microwave benches in X-Band. Klystron Power Supply For the klystron based microwave bench. Klystron power supply generates required beam and repeller voltage for the X-Band klystron tube like 2K25. It is very stable and contains the short circuit protection circuit. Also it has amplitude and frequency modulation circuits for the generation of 1 KHz square wave and the saw tooth wave.
Item Code: SKPS-610
SICO Klystron power supply generates voltage required for driving
the reflex klystron tubes like 2k25, 2k56, 2k22. It is absolutely stable, regulated
and short circuit protected power supply. It has built in facility of squire
wave and saw tooth generators, for amplitude and frequency modulation.
Operation Voltage - 230V+/- 10%, 50Hz AC
Beam supply - Voltage:200-450V continuously variable; Current: 50mA max.; Regulation: better than 0.5% for +/-10% variation in mains supply voltage; Ripple: less than 5mV rms
Repeller Supply - Voltage:-10V to -270V continuously variable with respect to klystron cathode; Regulation: better than 0.25% for +/-10% variation in mains supply voltage.
Heater Supply - 6.3V DC (regulated)
Modulation - Square Wave : Frequency 500Hz to 2000Hz; Max. Amplitude +110V peak to peak, Amplitude and frequency continuously variable; Sawtooth: Frequency 50Hz to 150Hz; Max. Amplitude -60V peak to peak, Amplitude and frequency continuously variable;